Selector Control Shaft Oil Seal Replacement

Special Tools Required 

• Attachment, 22 x 24 mm 07746-001A800
• Driver Handle, 15 x 135L 07749-0010000

1. Remove the oil seal from the transmission housing.
   Fig 1: Removing Oil Seal From Transmission Housing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new oil seal (A) in the transmission housing to a depth (B) of 0.3 - 1.0 mm (0.012 - 0.039 in) below the transmission housing surface (C) using the 15 x 135L driver handle and the 22 x 24 mm attachment.
   Fig 2: Installing Oil Seal Using Driver Handle And Bearing Driver Attachment

   Courtesy of AMERICAN HONDA MOTOR CO., INC.