LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2013 >> TL Base >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> Input Shaft (Mainshaft) Speed Sensor Replacement >> M/T

Input Shaft (Mainshaft) Speed Sensor Replacement: M/T

  1. Raise the vehicle on a lift.
  2. Remove the splash shield.
  3. Disconnect the input shaft (mainshaft) speed sensor connector (A).
    Fig 1: Input Shaft Speed Sensor Connector With Torque Specifications
    G08069590Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the input shaft (mainshaft) speed sensor (B).
  5. Install the parts in the reverse order of removal with a new O-ring (C).
  6. If needed, refill the manual transmission fluid (see TRANSMISSION FLUID INSPECTION AND REPLACEMENT ).
scientia non olet · About LEMON Manuals