LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2013 >> TL Base >> Repair and Diagnosis (Single Page) >> Steering >> Electronic Steering >> Electronic Power Steering (EPS) System >> DTC Troubleshooting >> DTC 35-05: EPS Control Unit Internal Circuit (A/D Conversion)

DTC 35-05: EPS Control Unit Internal Circuit (A/D Conversion)

  1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
  2. Clear the DTC with the HDS.
  3. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
  4. Start the engine.
  5. Wait 10 seconds or more.
  6. Check for DTCs with the HDS.

    Is DTC 35-05 indicated? 

    YES  - Check for loose terminals in the EPS control unit connectors, and repair if necessary. If no poor connections are found, replace the EPS control unit (see EPS CONTROL UNIT REMOVAL/INSTALLATION  ).

    NO  - Troubleshoot the indicated DTC. If there are no DTCs, the system is OK at this time.

scientia non olet · About LEMON Manuals