LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2013 >> TL Base >> Repair and Diagnosis (Single Page) >> Steering >> Electronic Steering >> Electronic Power Steering (EPS) System >> DTC Troubleshooting >> DTC 32-07: EPS Control Unit Internal Circuit (Current Sensor)

DTC 32-07: EPS Control Unit Internal Circuit (Current Sensor)

  1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
  2. Clear the DTC with the HDS.
  3. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
  4. Start the engine.
  5. Turn the steering wheel to the right or left, and wait 10 seconds or more.
  6. Check for DTCs with the HDS.

    Is DTC 32-07 indicated? 

    YES  - Check for loose terminals in the EPS control unit connectors, and repair if necessary. If no poor connections are found, replace the EPS control unit (see EPS CONTROL UNIT REMOVAL/INSTALLATION  ).

    NO  - Troubleshoot the indicated DTC. If there are no DTCs, the system is OK at this time.

scientia non olet · About LEMON Manuals