LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2013 >> TL Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Navigation System >> System Diagnostic Mode >> Functional Setup >> Demo Mode

Demo Mode

This screen is for factory use only, and should always be set to OFF. Occasionally the Demo setting is turned ON when vehicles are used at Auto Shows or similar events. Turning this feature on allows the navigation system to automatically follow a route to a destination when the vehicle is stationary. The Speed changes the speed of the demo mode.

Fig 1: Display - Demo Mode Screen
G08071782Courtesy of AMERICAN HONDA MOTOR CO., INC.