Driver's Side Vent Removal/Installation

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

Take care not to scratch the dashboard or the panels.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Remove the driver's dashboard trim (see DRIVER'S DASHBOARD TRIM REMOVAL/INSTALLATION ).
Remove the screw, and detach the clip, then remove the driver's side vent (A).

Fig 1: Identifying Driver's Side Vent
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the vent in the reverse order of removal, and note these items:
- If the clip is damaged or stress-whitened, replace it with a new one.
- Push the clip into place securely.