LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2012 >> TL Base >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Clutch Pedal Position Switch A Replacement >> M/T model

M/T model

  1. Disconnect the clutch pedal position switch A connector (B).
    Fig 1: Identifying Clutch Pedal Position Switch, Connector And Locknut
    G08068528Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Loosen the locknut (C), then remove clutch pedal position switch A.
  3. Install clutch pedal position switch A and adjust the pedal height (see CLUTCH PEDAL, CLUTCH PEDAL POSITION SWITCH A, AND CLUTCH PEDAL POSITION SWITCH B ADJUSTMENT ).
scientia non olet · About LEMON Manuals