Battery Terminal Disconnection and Reconnection: Reconnection

NOTE: Some systems store data in memory (including seat position, mirror position, etc) that is lost when the battery is disconnected. Do the following procedures to restore the systems back to normal operation.

Clean the battery terminals.
Test the battery (see BATTERY TEST ).
Reconnect the positive cable (A) to the battery (B) first, then reconnect the negative cable (C) to the battery.
NOTE: Always connect the positive cable to the battery first.

Fig 1: Battery, Positive And Negative Cable With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Apply multipurpose grease to the terminals to prevent corrosion.
Install the bulkhead cover (see ENGINE COMPARTMENT COVER REPLACEMENT ).
Enter the anti-theft code for the audio system or the audio-navigation unit.
Enter the audio presets (if applicable), and enter the XM audio presets (if equipped).
Set the clock (for vehicles without navigation).