LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2012 >> TL Base >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System >> Rearview Camera Removal/Installation

Rearview Camera Removal/Installation

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the trunk lid and related parts.
  1. Remove the trunk lid trim panel (see TRIM REMOVAL/INSTALLATION - TRUNK AREA ).
  2. Disconnect the rearview camera 12P connector (A) and remove the nuts (B).
    Fig 1: Identifying Rearview Camera 12P Connector & Nuts
    G08071867Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Pull the rear license trim (A) away from the trunk lid, then remove the grommet (B) from the trunk lid, and carefully pull the connector through the hole in the trunk lid.
    Fig 2: Identifying Rearview Camera, Rear License Trim, Connector, Grommet And Screws
    G08071868Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Disconnect the connector (C), remove the screws (D) and the rearview camera (E).
  5. Install the rearview camera in the reverse order of removal.
scientia non olet · About LEMON Manuals