LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2012 >> TL Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Multiplex Integrated Control System >> General Troubleshooting Information >> Using the HDS (Preferred Method)

Using the HDS (Preferred Method)

Connect the HDS to the Data Link Connector (DLC).

NOTE: There are two ways to read B-CAN code with the HDS.

First method; On the HDS, first select BODY ELECTRICAL, then select the subsystem that relates to the problem (for example: door locks, keyless, security, etc.), and then last, select the DTCs.

Second method; Ground the SCS circuit with the HDS, then read the DTCs displayed in the multi-information display (MID) in the gauge control module, then go to B-CAN SYSTEM DIAGNOSIS TEST MODE A .

scientia non olet · About LEMON Manuals