Utility Pocket Removal/Installation

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Acura Tool and Equipment Program; 888-424-6857

NOTE:

Put on gloves to protect your hands.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
Take care not to scratch the trim or the panels.

Remove the center console panel (see step 1 on CENTER CONSOLE REMOVAL/INSTALLATION ).
Remove the inner case (A), then remove the screws.

Fig 1: Removing Inner Case
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pull out the utility pocket (A), and disconnect the utility pocket light bulb socket (B), then remove the pocket.

Fig 2: Removing Pocket
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the pocket in the reverse order of removal, and note these items:
- Make sure the bulb socket is connected securely.
- Make sure the utility pocket light wire harness is not pinched.