Battery Terminal Disconnection and Reconnection: Reconnection

NOTE: Some systems store data in memory that is lost when the battery is disconnected. Do the following steps to restore the systems back to normal operation.

Clean the battery terminals.
Test the battery (see BATTERY TEST ).
Reconnect the positive cable (A) to the battery (B) first, then reconnect the negative cable (C) to the battery.
NOTE: Always connect the positive cable to the battery first.

Fig 1: Reconnecting Negative Cable To Battery With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Apply multipurpose grease to the terminals to prevent corrosion.
Enter the anti-theft code(s) for the audio system and/or the navigation system (if equipped).
Enter the audio presets (if applicable), and enter the XM radio presets (if equipped).
Set the clock (for vehicles without navigation).
Do the steering column position memorization (see STEERING COLUMN POSITION MEMORIZATION ).