PCM A/T Control System Inputs and Outputs at PCM connector A (□) (49P)
TERMINAL DESCRIPTION AND REFERENCE
| Terminal number | Wire color | Terminal name | Description | Signal |
|---|---|---|---|---|
| A1 | ORN | VBSOL2 (POWER SOURCE FOR SOLENOID VALVES) | Power source for solenoid valves | With ignition switch ON (II): battery voltage |
| A2 | PNK | SLS (SHIFT LOCK SOLENOID) | Drives shift lock solenoid | With ignition switch ON (II), in P, brake pedal pressed, and accelerator released: about 0 V |
| A6 | GRN | MRLY (PGM-FI MAIN RELAY 1) | Drives PGM-FI main relay 1 | With ignition switch ON (II): about 0 V With ignition switch LOCK (0):battery voltage |
| A8 | LT GRN | BKSW (BRAKE PEDAL POSITION SWITCH) | Detects brake pedal position switch signal | With brake pedal released: about 0 V With brake pedal pressed: battery voltage |
| A16 | GRN | ATPP (TRANSMISSION RANGE SWITCH P POSITION) | Detects transmission range switch P position signal input | In P: about 0 V In any position other than P: battery voltage |
| A23 | GRN | METINH (METER DISPLAY INHIBIT SIGNAL) | Sends A/T shift position inhibit signal | With ignition switch ON (II): about 10.0 V |
| A32 | BRN | SCS (SERVICE CHECK SIGNAL) | Detects service check signal | With service check signal shorted with the HDS: about 0 V With service check signal opened: about 5.0 V |
| A36 | BLU | SUPP (PADDLE SHIFTER + (UPSHIFT SWITCH)) | Detects paddle shifter + (upshift switch) signal | With ignition switch ON (II) and paddle shifter + (upshift switch) pressed: about 0 V With ignition switch ON (II) and paddle shifter + (upshift switch) released: battery voltage |
| A37 | PUR | SDNP (PADDLE SHIFTER _ (DOWNSHIFT SWITCH)) | Detects paddle shifter - (downshift switch) signal | With ignition switch ON (II) and paddle shifter - (downshift switch) pressed: about 0 V With ignition switch ON (II) and paddle shifter - (downshift switch) released: battery voltage |
| A48 | WHT | F-CAN H (F-CAN COMMUNICATION SIGNAL HIGH) | Sends and receives communication signal | With ignition switch ON (II): pulses |
| A49 | RED | F-CAN L (F-CAN COMMUNICATION SIGNAL LOW) | Sends and receives communication signal | With ignition switch ON (II): pulses |