LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2012 >> MDX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Shift Lever Knob Replacement

Shift Lever Knob Replacement

NOTE: Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands or gloves.
  1. Grasp the shift lever boot ring, and slip it out of the shift lever knob.
    Fig 1: Slipping Shift Lever Boot Ring Out Of Shift Lever Knob
    G08057508Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the screws (A), and remove the shift lever knob (B).
    Fig 2: Locating Shift Lever Knob With Torque Specifications
    G08057509Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Apply silicone grease to the top (C) of the shift lever rod.
  4. Install a new shift lever knob, and secure it with new screws.
  5. Slide the shift lever boot ring over the shift lever knob until it snaps on.
scientia non olet · About LEMON Manuals