LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2012 >> MDX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Selector Control Shaft Bearing Replacement >> Special Tools Required

Special Tools Required

  1. Remove the selector control shaft bearing from the transmission housing using the 15 mm bearing remover shaft set and the slide hammer.
    Fig 1: Removing Selector Control Shaft Bearing
    G08057605Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install a new bearing until it bottoms in the transmission housing using the 15 x 135L driver handle and the 28 x 30 mm bearing driver attachment.
    Fig 2: Installing Bearing Until It Bottoms In Transmission Housing
    G08057606Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals