Enable Conditions
| Condition | Minimum | Maximum | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Elapsed time after monitor finishing condition except immediate starting the engine | 1.0 second | - | |||||||
| Engine coolant temperature | None, unless the initial engine coolant temperature is 14 °F (-10 °C) or less, in which case the monitor will not run until the engine coolant temperature reaches 68 °F (20 °C) | ||||||||
| Engine speed | 500 rpm | 7,100 rpm | |||||||
| MAP value(1) | 1,000 rpm | 22 kPa (6.3 inHg, 158 mmHg)(2) 22 kPa (6.5 inHg, 163 mmHg)(3) |
- | ||||||
| 2,250 rpm | 21 kPa (6.2 inHg, 156 mmHg)(2) 21 kPa (6.0 inHg, 152 mmHg)(3) |
- | |||||||
| Fuel feedback | Other than during fuel cut-off operation | ||||||||
| No active DTCs set (prevents monitor from running) | P0107, P0108, P0117, P0118, P0122, P0123, P0222, P0223, P0335, P0339, P1109, P1128, P1129, P2227, P2228, P2229 | ||||||||
| Other | Test-drive on a flat road to avoid misdetection | ||||||||
|
|||||||||
| Condition | Minimum | Maximum | |||
|---|---|---|---|---|---|
| Elapsed time after monitor finishing condition except immediate starting the engine | 1.0 second | - | |||
| Engine coolant temperature | None, unless the initial engine coolant temperature is 14 °F (-10 °C) or less, in which case the monitor will not run until the engine coolant temperature reaches 68 °F (20 °C) | ||||
| Engine speed | 500 rpm | 6,800 rpm | |||
| MAP value(1) | 750 rpm | 25 kPa (7.3 inHg, 184 mmHg) | - | ||
| 2,000 rpm | 20 kPa (5.9 inHg, 149 mmHg) | - | |||
| Fuel feedback | Other than during fuel cut-off operation | ||||
| No active DTCs set (prevents monitor from running) | P0107, P0108, P0117, P0118, P0122, P0123, P0222, P0223, P0335, P0339, P1109, P1128, P1129, P2227, P2228, P2229 | ||||
| Other | Test-drive on a flat road to avoid misdetection | ||||
|
|||||