Transfer Breather Hose Replacement

Raise the vehicle on a lift, and make sure it is supported securely
Remove the transfer breather (A) from its bracket (B)

Fig 1: Identifying Transfer Breather And Bracket
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the breather hose clamp (A) from the hose clamp bracket (B), and remove the hose clamp (C) from the vacuum hose (D)

Fig 2: Identifying Breather Hose Clamp And Hose Clamp Bracket
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the harness clamp (E) on the breather hose from the engine harness (F)
Disconnect the breather hose (A) from the transfer breather pipe (B), and remove the breather hose from the hose clamp (C)

Fig 3: Identifying Breather Hose And Transfer Breather Pipe
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the breather hose over the breather pipe with the dot (D) as shown, and install the hose on the hose clamp at the dot (E)
Install the breather hose clamp on the hose clamp, and install the hose clamp on the vacuum hose at the mark
Install the harness clamp on the engine harness
Install the transfer breather on its bracket