Transfer Hypoid Drive Gear Bearing Replacement

Special Tools Required 

• Driver handle, 15 x 135L 07749-0010000
• Attachment, 42 x 47 mm 07746-0010300
• Attachment, 40 x 50 mm 07LAD-PW50601

1. Remove the tapered roller bearing (A) from the transfer hypoid drive gear (B) using the driver handle, the 42 x 47 mm attachment, a bearing separator (C) and a press
   Fig 1: Identifying Tapered Roller Bearing And Transfer Hypoid Drive Gear

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new bearing on the transfer hypoid drive gear using the driver handle, the 40 x 50 mm attachment, and a press
   Fig 2: Identifying Bearing On Transfer Hypoid Drive Gear

   Courtesy of AMERICAN HONDA MOTOR CO., INC.