Transfer Cover Oil Seal Replacement

Special Tools Required 

• Driver handle, 15 x 135L 07749-0010000
• Attachment, 65 mm 07JAD-SH30100

1. Remove the oil seal (A) from the transfer cover
   Fig 1: Removing Oil Seal

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new oil seal (A) in the transfer cover (B) to a height (C) of 0-1 mm (0-0 04 in) above the transfer cover surface using the driver handle and the 65 mm attachment
   Fig 2: Installing Oil Seal

   Courtesy of AMERICAN HONDA MOTOR CO., INC.