LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2011 >> TL Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> General Troubleshooting Information >> Clear A/T DTCs Procedure

Clear A/T DTCs Procedure

  1. Connect the HDS to the DLC (A) located under the driver's side of the dashboard
    Fig 1: Identifying Data Link Connector
    G05990587Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode
  3. Make sure the HDS communicates with the PCM If it does not, go to the DLC circuit troubleshooting (see DLC CIRCUIT TROUBLESHOOTING )
  4. Clear the DTC(s) on the HDS screen
scientia non olet · About LEMON Manuals