3rd Clutch Transmission Fluid Pressure Switch Replacement
- Raise the vehicle on a lift, or apply the parking brake, block both rear wheels, and raise the front of the vehicle Make sure it is securely supported
- Remove the splash shield.
- Disconnect the 3rd clutch transmission fluid pressure switch connector, and remove the 3rd clutch transmission fluid pressure switch (A)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install a new 3rd clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the switch
- Make sure there is no water, oil, dust, or foreign particles inside the connector
- Connect the connector securely
- Install the splash shield