LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2011 >> TL Base >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Clutch Pedal Position Switch A Replacement >> M/T Model

M/T Model

  1. Disconnect the clutch pedal position switch A connector (A).
    2. Fig 1: View Of Continuity Table
    G00492178Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Loosen the locknut (B), then remove the clutch pedal position switch A (C).
  3. Install the clutch pedal position switch A and adjust the pedal height (see Clutch Pedal, Clutch Pedal Position Switch A, and Clutch Pedal Position under CLUTCH
scientia non olet · About LEMON Manuals