LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2011 >> TL Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication >> Oil Jet Bolt Inspection

Oil Jet Bolt Inspection

  1. Remove the oil jet bolt (see OIL FILTER FEED PIPE REPLACEMENT )
  2. Inspect the oil jet bolt as follows
    • Make sure that a 0 6 mm (0 02 in) diameter drill will go through the oil intake (0 7 mm (0 03 in) diameter) Make sure the check ball (A) moves smoothly and has a stroke of about 4 0 mm (0 16 m)
    • Check the oil jet bolt operation with an air nozzle It should take at least 120 kPa (1.2 kgf/cm2 , 17 psi) to unseat the check ball
    Fig 1: Identifying Oil Jet Bolt
    G05987107Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals