LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2011 >> RL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> General Troubleshooting Information >> Clear A/T DTCs Procedures

Clear A/T DTCs Procedures

  1. Connect the HDS to the DLC (A).
    Fig 1: Identifying Data Link Connector
    G07362147Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Turn the ignition switch to ON (II). Make sure the HDS communicates with the PCM. If it does not, go to the DLC circuit troubleshooting (see DLC CIRCUIT TROUBLESHOOTING ).
  3. Clear the DTC(s) with the HDS.
scientia non olet · About LEMON Manuals