LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2011 >> RDX 2.3 TB2 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> DTC Troubleshooting >> DTC P16C0: PCM A/T Control System Incomplete Update

DTC P16C0: PCM A/T Control System Incomplete Update

NOTE:
  • Before you troubleshoot, record all freeze data and any on-board snapshot with the HDS, and review the GENERAL TROUBLESHOOTING INFORMATION .
  • Do not turn the ignition switch to LOCK (0) or ACCESSORY (I) while updating the PCM. If you turn the ignition switch to LOCK (0) or ACCESSORY (I) before completion, the PCM can be damaged.
  • This code is indicated when PCM updating is incomplete.
  1. Update the A/T software in the PCM (see PCM UPDATE ).
  2. Check for Pending or Confirmed DTCs with the HDS.

    Is DTC P16C0 indicated? 

    YES  -Replace the PCM (see PCM REPLACEMENT ).

    NO  -PCM updating is complete.

scientia non olet · About LEMON Manuals