VSA Modulator-control Unit Inputs and Outputs for 46P Connector

Fig 1: Identifying VSA Modulator-Control Unit Inputs And Outputs For 46P Connector End View

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Terminal number	Wire color	Terminal sign	Description	Signal
8	WHT	RR-GND	Detects right-rear wheel speed sensor signal	-
10	RED	RL-GND	Detects left-rear wheel speed sensor signal
11	YEL	RL +B	Detects left-rear wheel speed sensor signal
12	ORN	FL +B	Detects left-front wheel speed sensor signal
15	LT BLU	K-LINE	Communicates with HDS
28	PNK	FR-GND	Detects right-front wheel speed sensor signal
29	GRN	FR +B	Detects right-front wheel speed sensor signal
30	LT GRN	RR +B	Detects right-rear wheel speed sensor signal
34	GRY	FL-GND	Detects left-front wheel speed sensor signal
38	RED	F-CAN L	F-CAN communication circuit
39	WHT	F-CAN H	F-CAN communication circuit
40	GRN	IG1	Power source for activating the system	With ignition switch ON (II): battery voltage (about 12 V)
43	BLK	GND	Ground for the VSA modulator-control unit	Continuity to ground
44	WHT	FSR +B	Power source for the valve relay	Battery voltage (about 12 V) at all times
45	RED	MR +B	Power source for the motor relay	Battery voltage (about 12 V) at all times
46	BLK	MR-GND	Ground for the pump motor	Continuity to ground