LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2011 >> RDX 2.3 TB1 >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Switch Replacement >> Front passenger's

Front passenger's

  1. Removal the front passenger's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 14P connector (A) from the power window switch.
    Fig 1: Identifying Power Window Switch, 14P Connector, Harness Clip And Pocket
    G08061314Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the harness clips (B) from the power window switch.
  4. Remove the three screws from the door panel, then pull out the utility pocket (C).
  5. Remove the three screws and the power window switch (A) from the door panel.
    Fig 2: Identifying Power Window Switch And Screws
    G08061315Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Remove the four screws from the power window switch.
  7. Install the switch in the reverse order of removal.
  8. After replacement, reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT  ).
scientia non olet · About LEMON Manuals