Headlight Leveling Motor Replacement: Installation
- Insert the headlight leveling motor shaft (A) into the headlight housing, then turn the adjuster (B) until the shaft connects to the headlight.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Slightly pull the headlight leveling motor (C) back so that its projection (D) clears the stopper (E), and then rotate the motor 45° clockwise to install to the headlight.
- Tighten the adjuster until it is fully secure, but do not over tighten, then back it off 9 turns.
- Insert the headlight in the reverse order of removal.
- After installing, do the headlight leveling motor initial position learning procedure