LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2010 >> RL >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Overhaul >> Brush Spring Inspection

Brush Spring Inspection

  1. Insert the brush (A) into the brush holder, and bring the brush into contact with the commutator, then attach a spring scale (B) to the spring (C). Measure the spring tension at the moment the spring lifts off the brush. If it is not within the standard, replace the brush holder assembly.

    Spring Tension 

    Standard (New): 22.3-27.3 N 

    (2.27-2.78 kgf, 5.00-6.13 lbf) 

    Fig 1: Measuring Spring Tension At Moment Spring Lifts Off Brush
    G06163213Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals