LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2010 >> RDX 2.3 TB2 >> Repair and Diagnosis >> Engine Performance >> System >> Advanced Diagnostics >> DTC P145A: Evaporative Emission (EVAP) System Incorrect Purge Flow Detected >> Driving Pattern

Driving Pattern

  1. Start the engine. Hold the engine speed at 3,000 rpm without load (in P or N) until the radiator fan comes on.
  2. Let the engine idle for at least 59 seconds.
  3. Drive the vehicle on boost for at least 14 seconds.
  4. Turn the ignition switch to LOCK (0) for at least 10 seconds.
    • Drive the vehicle in this manner only if the traffic regulations and ambient conditions allow.
scientia non olet · About LEMON Manuals