LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TSX Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Driver Position Memory System (DPMS)) >> General Troubleshooting Information >> Displaying the Diagnostic Trouble Code (DTC)

Displaying the Diagnostic Trouble Code (DTC)

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF, and move the seat to a non-memorized position.
  2. Press and hold the MEMO button (A) and both position buttons (B) on the driving position memory switch at the same time.
    Fig 1: Identifying MEMO Button, Position Buttons And Position Button Indicators
    G05489091Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Turn the ignition switch ON (II), and wait at least 1 second, then release the three buttons.
  4. After 1 second, the position button indicators (C) will blink to show the DTC.
scientia non olet · About LEMON Manuals