Oil Pressure Test

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.

If the oil pressure warning indicator stays on with the engine running, check the engine oil level. If the oil level is correct:

Remove the oil pressure switch, and install an oil pressure gauge (A).

Fig 1: Identifying Oil Pressure Gauge
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Start the engine. Shut it off immediately if the gauge registers no oil pressure, and repair the problem before continuing.
Allow the engine to reach operating temperature (fan comes on at least twice). The pressure should be:
Engine Oil Temperature: 176°F (80°C)

Engine Oil Pressure:
- At Idle: 70 kPa (0.7 kgf/cm ² , 10 psi) min.
- At 3,000 rpm: 300 kPa (3.1 kgf/cm ² , 44 psi) min.
If the oil pressure is not within specifications, inspect these items.
- Check the oil screen for clogging.
- Inspect the oil pump (see OIL PUMP INSPECTION ).