LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TSX Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Automatic Transmission) >> A/T Interlock System >> Shift Lock Solenoid Replacement

Shift Lock Solenoid Replacement

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the shift lever assembly (see SHIFT LEVER REMOVAL  ).
  2. Release the shift lock solenoid bushing (A) securing the shift lock solenoid, and remove the shift lock solenoid.
    Fig 1: Identifying Shift Lock Solenoid
    G05491504Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the shift lock solenoid plunger (B) and the plunger spring (C) in a new shift lock solenoid (D).
  4. Apply silicone grease to the joint of the shift lock solenoid plunger, if necessary.
  5. Install a new shift lock solenoid by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock stop (E).
  6. Install the shift lever assembly (see SHIFT LEVER INSTALLATION  ).
scientia non olet · About LEMON Manuals