Reverse Lock System Circuit Troubleshooting
WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
- Check whether DTC P0705 or P0706 is indicated.
Is either DTC indicated?
YES - Go to the INDICATED DTC'S TROUBLESHOOTING .
NO - Go to step 2.
- Turn the ignition switch to LOCK (0).
- Shift the shift lever to P while pushing the shift lock release.
- Turn the ignition switch to ON (II).
- Press the brake pedal and release the accelerator pedal, shift the shift lever out of P, and check that the shift lock solenoid operates.
Does the shift lock solenoid work properly?
YES - Check the reverse lock (shift lock mechanism). If the mechanism does not work, repair or replace the shift lever assembly.
NO - Do the Shift Lock System Circuit Troubleshooting (see SHIFT LOCK SYSTEM CIRCUIT TROUBLESHOOTING ).