LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TSX Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Automatic Transmission) >> A/T Interlock System >> Park Pin Switch Replacement

Park Pin Switch Replacement

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the shift lever assembly (see SHIFT LEVER REMOVAL  ).
  2. Disconnect the transmission gear selection switch/ park pin switch connector (A), then remove the connector from the shift lever bracket base.
    Fig 1: Identifying Transmission Gear Selection Switch/Park Pin Switch Connector
    G05491506Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the A/T gear position indicator panel light bulb socket (B), then remove the bulb (C) from the socket.
  4. Remove the transmission gear selection switch/ park pin switch (D) by releasing the lock tabs (E).
  5. Install a new switch assembly in the shift lever bracket base.
  6. Install the bulb in the socket, then install the socket in the bracket base.
  7. Install the switch connector on the bracket base, then connect the connector.
  8. Install the shift lever assembly (see SHIFT LEVER INSTALLATION  ).
scientia non olet · About LEMON Manuals