Fuel Tank Replacement: Installation

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.

Install the tank straps (A), and tighten the bolts (B).

Fig 1: Tank Straps Bolts W/Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Place a jack or support under the rear suspension subframe. Install the rear suspension subframe, aligning the pins (A) with the holes in the subframe.

Fig 2: Identifying Rear Suspension Subframe Pins
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the parts in the reverse order of removal.
After installation, do a wheel alignment (see WHEEL ALIGNMENT ).