Engine Lubrication
ENGINE LUBRICATION MEASUREMENT SPECIFICATION
| Item | Measurement | Qualification | Standard or New | Service Limit |
|---|---|---|---|---|
| Engine oil | Capacity | Engine overhaul | 5 1 L (5 4 US qt) | |
| Oil change including filter | 4 0 L (4 2 US qt) | |||
| Oil change without filter | 3 8 L (4 0 US qt) | |||
| Oil pump | Inner-to-outer rotor clearance | 0 06-0 16 mm (0 002-0 006 in) | 0 19 mm (0 0075 in) | |
| Pump housing-to-outer rotor radial clearance | 0 15-0 21 mm (0 006-0 008 in) | 0 23 mm (0 009 in) | ||
| Pump housing-to-rotor axial clearance | 0 035-0 070 mm (0 0013-0 0028 in) | 0.12 mm (0 005 in) | ||
| Balancer shafts, journal diameter | No 1 journal, front shaft | 19 938-19 950 mm (0 7850-0 7854 in) | 19 92 mm (0 784 in) | |
| No 1 journal, rear shaft | 23 938-23 950 mm (0 9424-0.9429 in.) | 23 92 mm (0.942 in) | ||
| No 2 journal, front and rear shafts | 32 949-32 961 mm (1 2972-1 2977 in) | 32 93 mm (1 296 in) | ||
| Balancer shafts, journal taper | 0 005 mm (0 0002 in) max | -- | ||
| Balancer shafts, end play | Front | 0 063-0 108 mm (0 0025-0.0043 in.) | 0 14 mm (0 006 in.) | |
| Rear | 0 063-0 108 mm (0 0025-0 0043 in) | 0 14 mm (0 006 in) | ||
| Balancer shafts, shaft-to-bearing clearance | No. 1 journal, front shaft | 0 050-0 082 mm (0 0020-0 0032 in) | 0 10 mm (0 004 in) | |
| No 1 journal, rear shaft | 0 050-0 082 mm (0 0020-0 0032 in) | 0 10 mm (0 004 in) | ||
| No 2 journal, front and rear shafts | 0 060-0 120 mm (0 0024-0 0047 in) | 0 15 mm (0 006 in) | ||
| Balancer shaft bearings, I D | No 1 journal, front shaft | 20 000-20 020 mm (0 7874-0 7882 in) | 20 03 mm (0 789 in) | |
| No 1 journal, rear shaft | 24 000-24 020 mm (0 9449-0 9457 in) | 24 03 mm (0 946 in.) | ||
| No 2 journal, front and rear shafts | 33 021-33 069 mm (1 3000-1 3019 in) | 33 09 mm (1 303 in) | ||
| Relief valve, oil pressure with oil temperature at 176°F (80 °C) | At idle | 70 kPa (0 7 kgf/cm2 , 10 psi) mm | ||
| At 3, 000 rpm | 300 kPa (3 1 kgf/cm2 , 44 psi) mm | |||