Audio-HVAC Display Panel Disassembly/Reassembly

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the audio-HVAC display panel (see AUDIO-HVAC DISPLAY PANEL REMOVAL/INSTALLATION ).
Remove the mounting screws and the cover (A).
Without navigation

Fig 1: Identifying Mounting Screws And Cover (Without Navigation)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

With navigation

Fig 2: Identifying Mounting Screws And Cover (With Navigation)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
With navigation system: Remove the mounting screws and disconnect the connectors (A) from the circuit board (B), then remove the circuit board from the display unit (C).

Fig 3: Identifying Connectors, Circuit Board And Display Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
With navigation system: Remove the mounting screws and the display unit (D).

Fig 4: Identifying Mounting Screws And Display Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Without navigation system: Remove the mounting screws, then remove the printed circuit board (A).

Fig 5: Identifying Mounting Screws And Printed Circuit Board
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the audio unit and printed circuit board in the reverse order of removal.