Hood Latch Replacement

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front grille cover (see FRONT GRILLE REPLACEMENT ).
Remove the bolts, then remove the hood latch cover (A) from the hood latch (B).

Fig 1: Removing Hood Latch Cover From Hood Latch w/Torque Spec.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the hood latch switch connector (A).

Fig 2: Disconnecting Hood Latch Switch Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts, then remove the hood latch (A) from the body.

Fig 3: Removing Hood Latch From Body w/Torque Spec.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the hood opener cable (B) from the hood latch. Take care not to kink the cable.
Install the latch in the reverse order of removal, and note these items:
- Apply multipurpose grease to each location of the hood latch indicated by the arrows.
- Make sure the hood opener cable is connected properly and hood latch switch connector is plugged in properly.
- Adjust the hood latch alignment (see HOOD ADJUSTMENT ).
- Make sure the hood opens properly and locks securely.
  
  Fig 4: Disconnecting Hood Opener Cable From Hood Latch
  Courtesy of AMERICAN HONDA MOTOR CO., INC.