LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TSX Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Automatic HVAC System) >> Climate Control >> Receiver/Dryer Desiccant Replacement

Receiver/Dryer Desiccant Replacement

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C condenser (see A/C CONDENSER REPLACEMENT  ).
  2. Remove the lower cushion (A), then remove the cap (B) from the bottom of the A/C condenser. Remove the O-rings (C), the filter (D) and the desiccant (E).
    Fig 1: Identifying Lower Cushion, Cap And A/C Condenser
    G05492722Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the desiccant in the reverse order of removal, and note these items:

    Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (SP-10) before installing them. Be sure to use the correct O-rings for HFC-134a (R-134a) to avoid leakage.

scientia non olet · About LEMON Manuals