A/C Compressor Thermal Protector Replacement

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the bolt, the ground terminal (A), and the holder (B). Disconnect the field coil connector (C), then remove the thermal protector (D).

Fig 1: Thermal Protector W/Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Replace the thermal protector (A) with a new one, and apply silicone sealant (B) to the bottom of the thermal protector.

Fig 2: Applying Silicone Sealant To Thermal Protector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the thermal protector in the reverse order of removal.