Rear Power Window Motor Test

Remove the rear power window switch (see FRONT PASSENGER'S POWER WINDOW SWITCH REPLACEMENT )
Test the motor in each direction by connecting battery power and ground to the rear power window switch 14P connector (A) according to the table

Fig 1: Identifying Motor Test Reference Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Identifying Rear Power Window Switch 14P Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, go to step 4
Remove the door panel (see REAR DOOR PANEL REMOVAL/INSTALLATION )
Disconnect the 2P connector (A) from the rear power window motor (B)

Fig 3: Identifying Rear Power Window Motor 2P Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between rear power window switch 14P connector terminals No 1 and No 7, and rear power window motor 2P connector terminals No 1 and No 2 respectively There should be continuity
REAR POWER WINDOW REAR POWER WINDOW

SWITCH 14P MOTOR 2P CONNECTOR

CONNECTOR

Terminal No 1 Terminal No 1

Terminal No 7 Terminal No 2

Fig 4: Checking Continuity Between Rear Power Window Switch 14P Connector Terminals No 1 And No 7
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the wire harness is OK, replace the rear power window motor