Drive Plate Removal and Installation

Remove the transmission assembly (see TRANSMISSION REMOVAL )
Remove the drive plate (A) and the washer (B) from the engine crankshaft
With SH-AWD

Fig 1: Drive Plate And Washer From Engine Crankshaft With Torque Specification (With SH-AWD)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Without SH-AWD

Fig 2: Drive Plate And Washer From Engine Crankshaft With Torque Specification (Without SH-AWD)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the drive plate and the washer on the engine crankshaft, and tighten the eight bolts in a crisscross pattern in at least two steps
Install the transmission assembly (see DRIVE PLATE REMOVAL AND INSTALLATION )