LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> TL Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System >> Climate Control >> Receiver/Dryer Desiccant Replacement

Receiver/Dryer Desiccant Replacement

NOTE: Install the receiver/dryer as quickly as possible to prevent the system from absorbing moisture from the air
  1. Remove the A/C condenser (see A/C Condenser Replacement )
  2. Remove the cap (A) from the bottom of the A/C condenser Remove the O-ring (B) and the desiccant (C)
    Fig 1: A/C Condenser O-Ring And Cap With Torque Specification
    G05988749Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the receiver/dryer in the reverse order of removal, and note these items
    • Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (DENSO ND-OIL 8) before installing them Be sure to use the correct O-rings for HFC-134a (R-134a) to avoid leakage
    • Install the cap to the specified torque It is made of plastic and can be easily stripped
scientia non olet · About LEMON Manuals