Oil Filter Feed Pipe Replacement
- Remove the oil filter (see
ENGINE OIL FILTER REPLACEMENT )
- Remove the oil filter feed pipe
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and hold one nut with a wrench, then tighten the other nut
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Apply new engine oil to the oil filter feed pipe threads, then torque the oil 1 liter feed pipe to 35 Nm (3.6 kgf.m, 26 lbf.ft), then remove the nuts from the oil filter feed pipe
- Install the oil filter (see
ENGINE OIL FILTER REPLACEMENT )