Transfer Hypoid Drive Gear Bearing Replacement

Special Tools Required 

• Driver 07749-0010000
• Attachment, 42 x 47 mm 07746-0010300
• Attachment, 40 x 50 mm 07LAD-PW50601

1. Remove the tapered roller bearing (A) from the transfer hypoid drive gear (B) using the driver, the attachment (42 x 47 mm), bearing separator (C) and a press.
   Fig 1: Removing Tapered Roller Bearing From Transfer Hypoid Drive Gear Using Driver

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install the new bearing on the transfer hypoid drive gear using the driver, the attachment (40 x 50 mm), and a press.
   Fig 2: Installing Bearing On Transfer Hypoid Drive Gear Using Driver

   Courtesy of AMERICAN HONDA MOTOR CO., INC.