LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> RL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> 3rd Clutch Transmission Fluid Pressure Switch Replacement

3rd Clutch Transmission Fluid Pressure Switch Replacement

  1. Raise the vehicle on a lift, or apply the parking brake, block both rear wheels, and raise the front of the vehicle. Make sure it is securely supported.
  2. Remove the splash shield.
  3. Disconnect the 3rd clutch transmission fluid pressure switch connector, and remove the 3rd clutch transmission fluid pressure switch (A).
    Fig 1: Locating 3rd Clutch Transmission Fluid Pressure Switch With Torque Specifications
    G06164474Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the new 3rd clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the switch.
  5. Make sure there is no water, oil, dust, or foreign particles inside the connector.
  6. Connect the connector securely.
  7. Install the splash shield.
scientia non olet · About LEMON Manuals