LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> RL >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System >> Oil Filter Feed Pipe Replacement

Oil Filter Feed Pipe Replacement

  1. Remove the filter (see ENGINE OIL FILTER REPLACEMENT ).
    Fig 1: Rubber Seal Mark Chart
    G06163599Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the oil filter feed pipe.
  3. Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and hold one nut with a wrench, then tighten the other nut.
    Fig 2: Identifying Oil Filter Feed Pipe
    G06163600Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Tighten the oil filter feed pipe to 49 N.m (5.0 kgf.m, 36 lbf.ft), then remove the nuts from the oil filter feed pipe.
scientia non olet · About LEMON Manuals