LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> RL >> Repair and Diagnosis >> Electrical >> Body Electrical >> Under-Dash Fuse/Relay Box >> Passenger's Under-dash Fuse/Relay Box Removal/Installation >> Removal

Passenger's Under-dash Fuse/Relay Box Removal/Installation: Removal

  1. Do the battery terminal disconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
  2. Remove the right front door sill trim and right kick panel (see TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
  3. Disconnect the connectors from the passenger's under-dash fuse/relay box (A).
    Fig 1: Identifying Passenger's Under-Dash Fuse/Relay Box And Tab
    G06162666Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the mounting bolts and remove the passenger's under-dash fuse/relay box.
  5. Carefully remove the relays using the relay puller, then release the tab (B) and remove the right kick panel mounting bracket (C).
    NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start.
scientia non olet · About LEMON Manuals