VSA OFF Switch Test

Make sure the ignition switch is in LOCK (0).
Remove the VSA OFF switch (A) from the switch panel.

Fig 1: Identifying VSA Off Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the VSA OFF switch 5P connector.
Check for continuity between VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be continuity when the switch is pushed.

Fig 2: Checking Continuity Between VSA Off Switch 5P Connector Terminals No. 1 And No. 2
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between VSA OFF switch 5P connector terminals No. 4 and No. 5. There should be continuity at all times.

Fig 3: Checking Continuity Between VSA Off Switch 5P Connector Terminals No. 4 And No. 5

Courtesy of AMERICAN HONDA MOTOR CO., INC.